26 of 48
Installation and Connection
For installation on the rear panel of a TV set, securing with two screws is sufficient. Before installing the CAP converter,
pay attention to the following:
●
The TV set must have one of the following hole patterns for wall mounting on its rear panel: 100 x 100; 100 x 200; 200 x
200 or 200 x 400. If this is not the case, a VESA adaptor plate can be obtained from a specialist dealer.
●
Before installing the CAP converter it is essential you read the section
Wall mounting
(or the equivalent) in the user
instructions for your TV set. This will tell you the screw diameters (M4, M6 or M8) and the permissible screw penetra-
tion depth.
5.2.5 Installing the CAP Converter
Risk of material damage from applying too much force when tightening the screws!
If you apply too much force when tightening the screws, you can damage the screw sockets and the CAP
converter casing or any cables already attached to it.
►
Tighten the screws carefully.
Example for mounting on wood:
Screw projection
Summary of Contents for CAP 650 GPS
Page 37: ...37 of 48 10 2 Dimensions in mm 144 5 65 5 ...
Page 47: ...47 of 48 ...
