39 of 48
11
Safety Instructions and General Guidelines
In the following operating manual we assume that the CAP converter or the alphatronics TV set and the turntable have
been properly installed and connected, as described in Chapter 4, p. 7 and Chapter 5, p. 12. If you have not yet
done so, read the safety instructions in this installation and operating manual and follow them when handling the
CAP converter or the alphatronics TV set and the turntable!
Before setting up your satellite system, make sure that the location allows a free view to the satellite posi-
tions to the south and is not shadowed by trees or other obstructions.
Risk of malfunction and material damage from:
Overheating of the turntable motor!
If the turntable motor operates without interruption for longer than 20 minutes, it can cause overheating
of the motor. None of the automatically initiated search procedures requires as much as 20 minutes of
operation. Only repeated unsuccessful search procedures or manual overrides by the user can cause this
limit to be exceeded.
►
Do not let the turntable motor continuously run for longer than 20 minutes.
Absence of the ignition signal!
As soon as the ignition signal is no longer present at the turntable, it may automatically move to the last
known satellite position. Precondition: The receiver is switched on and the turntable is supplied with a +12
V power supply.
ca. 10 m
Good reception
No signal
ca.
10 m
HDP/CAP 6xx
HDP/CAP 6xx
Summary of Contents for CAP 650 GPS
Page 37: ...37 of 48 10 2 Dimensions in mm 144 5 65 5 ...
Page 47: ...47 of 48 ...
