27 of 48
5.2.6 Connecting the CAP converter
The CAP converter must not be connected to any supply voltage other than 10.5 to 15.5 V. The CAP
converter’s earth connection must be connected to the negative pole of the motor home or caravan
battery. Isolate the on-board power supply (master switch “off” or disconnect the positive pole of the
on-board power supply battery) before commencing the following work.
●
Connect the master coaxial cable (coming from the turntable) to the “IF IN” F-socket on the rear of the CAP
converter.
●
Connect the “IF OUT” connection of the CAP converter and a receiver or TV set with integrated tuner with a coaxial
cable.
●
Connect the power cable supplied (depending on the power supply available in your motor home or caravan, either a
12 V supply or a 230 V supply via a power supply unit) to the “
12V 2,0A
” socket on the CAP converter.
●
Check the connections before you reconnect the on-board power supply.
●
For commissioning and more detailed information on additional operating functions, please consult the operating
instructions part of this operating manual.
5.2.7 Connection Example for 12 V Battery Connection
CAPcontrol app*
control & streaming
Ignition
12V
CAP Converter
control unit
HDS 50*
separate control panel
TV set 2
with satellite tuner
UFZ 131*
Wi-Fi Hotspot
TV set 1
with satellite tuner
Slave coaxial cable
Master
coaxial cable
Power supply cable
Summary of Contents for CAP 650 GPS
Page 37: ...37 of 48 10 2 Dimensions in mm 144 5 65 5 ...
Page 47: ...47 of 48 ...
