Kasei KZ-4000MT-PRO-2S, Owner'S/Operator'S Manual

Page: 111 / 118

95
Resetting tined for deep cultivation
The tines are factory assembled with blade ends offset for standard cultivation, for deep
cultivation ,the left tine must be repositioned on the hub aligning the left and right tine blade ends
directly across from each other
1 remove four(4)spring pins (A)and four(4)parallel pins(B)mounting left tine to hub ,the bolts will
be mounted in hole labeled
2.Rotate tine counter clockwise and position hole labeled(4)over hub mounting holes, the tine blade
ends should be aligned directly opposite each other
3 install and tighten bolts