Kasei KZ-4000MT-PRO-2S, Owner'S/Operator'S Manual

Page: 38 / 118

29
Do not use the unit if it is damaged or poorly adjusted. Never remove the machine's guard.
Serious injury to the operator or bystanders could result as well as damage to the machine.
Inspect the area to be cut and remove all debris that could become entangled in the machine.
Also remove any objects that the unit may throw during cutting.
Keep all bystanders,especially children and pets, from the work area, at least 15
METER(50 FEET) from the operating area.
Never leave the machine unattended.
Do not use this unit for any job other than those for which it is intended as described in this
manual.
Do not overreach. Keep proper footing and balance at all times. Do not run the unit while
standing on a ladder or on any other unstable footing location.
Do not use the unit when you are tired, ill or under the influence of medication, drugs or
alcohol.
FOLLOW INSTRUCTION FOR CHANGING ACCESSORIES.
Do not store in a closed area where fuel vapors can reach an open flame from hot water heaters,
heaters, furnaces, etc. Store in a locked, well ventilated area only.
Ensure safe and proper performance of your product. These part are available from your dealer.
The use of any other accessories or attachments may cause a potential hazard or injury to the
user, damage to the machine and void this warranty. Replace damaged parts with only the ones that
are identical with original part. Spare parts are available from your dealer.
Clean the machine completely, especially, the fuel tank, its surroundings, and the air cleaner.
When refueling, be sure to stop the engine and confirm that it is cooled down. Never refuel
when the engine is running or hot. When gasoline spills, be sure to wipe it up completely and
properly dispose of those materials before starting the engine.
When ever approaching an operator of the machine, carefully call his attention and confirm that
the operator stops the engine. Be careful not to distract the operator which can cause an unsafe
situation.
Never touch the rotating parts when ever the engine is running.