Kasei KZ-4000MT-PRO-2S, Owner'S/Operator'S Manual, Page: 39 / 118

30
Pay attention to loosening and overheating of parts. If there is any abnormality of the machine,
stop operation immediately and check the machine carefully. If necessary, have the machine
serviced by a authorized dealer. Never continue to operate a machine which may be malfunctioning.
In start-up or during operation of the engine, never touch hot parts such as the muffler, the high
voltage wire or the spark plug.
This power tool should be carried only in a horizontal position. Grip the shaft in a manner that
the machine is balanced horizontally. Keep the hot muffler away from your body and the cutting
attachment behind you. Accidental acceleration of the engine can cause the chain to rotate and cause
serious injuries.
Always switch off the engine and fit the scabbard over the cutting
attachment before transporting the power tool over long distances. When
transporting it in a vehicle, properly secure it to prevent turnover, fuel
spillage and damage to the unit.
After the engine has stopped, the muffler is still hot. Never place the machine in any places
where there are flammable materials (dry grass, etc.), combustible gasses or combustible liquids.
Pay special attention to operation in the rain or just after the rain as the ground may be slippery.
If you slip or fall to the ground or into a hole, release the throttle lever immediately.
Be careful not to drop the machine or hit it against obstacles.
Before proceeding to adjust or repair the machine, be sure to stop the engine and detach the
spark plug cap from the spark plug.
When the machine is placed in storage for a long time, drain fuel from the fuel tank and
carburetor, clean the parts, move the machine to a safe place and confirm that the engine is cooled
down.
Make periodic inspections to assure safe and efficient operation. For a thorough inspection of
your machine, please contact a dealer.
Keep the machine away from fire or spark.
It is believed that a condition called Raynaud's phenomenon, which affects the fingers of certain
individuals may be brought about by exposure to vibration and cold. Exposure to vibration and cold
may cause tingling and burning sensations followed by loss of color and numbness in the fingers.
The following precautions are strongly recommended because the minimum exposure which might
trigger the ailment is unknown.