Kasei KZ-4000MT-PRO-2S, Owner'S/Operator'S Manual

Page: 98 / 118

85
ATTACHING THE TOOLS TO THE DRIVE SHAFT ASSEMBLY
1. Rest the power unit/shaft assembly on a flat firm surface.
2. Ensure that the clamping wing nut (2) is loose, pull out locator pin (1).
3. Carefully fit attachment drive shaft assembly (5) into coupler (3).
4. After the attachment drive shaft is in the coupler, release the locator pin (1).
5. Turn the attachment drive shaft until the locator pin engages with the locating hole (4) in the
drive shaft, when this has happened it will not be possible to twist the drive shaft.
6. Secure the drive shaft by tightening the clamping wing nut (2).