background image

 27 
 

SYMBOLS WARNING 

 

Important: Some of the following symbols may be used on your tool. Please study them and learn 

their meaning.Proper interpretation of these symbols will allow you to operate the tool better and 
more safely. 
 

SYMBOLS NAME 

DESIGNATION/EXPLANATION 

 

Safety Alert Symbol 

Indicates danger, warning or caution. It means attention!   
Your safety is involved. 

 Read 

The 

Operator’ 

Manual 

Your manual contains special messages to bring attention to 
potential safety concerns as well as operating and servicing 
information. Please read all the information carefully to 
ensure satification and safe use. 

 

Boots 

Wear non-slip safety footwear when using this equipment. 

 

Gloves 

Wear non-slip, heavy-duty gloves. 

 

Keep bystanders away 

 

Keep all bystanders at least 15m (50 ft) away.Keep the pole 

pruner a sufficient distance away from electrical power 

lines. 

 

No Smoking 

Do not smoke when mixing fuel or filling fuel tank. 

 

Oil 

Use 2-stroke oil for air cooled engines. 

 Appropriate 

ear, 

eye, 

and head protection 
must be worn - Option 
2 (front viewof human 
head) 

Depiction of human head (front view) wearing ear, eye, and 
head protective equipment. 

 

Beware of chain saw 
kickback and avoid 
contact with bar tip 

Movement of chain saw upward from log. 

 

 

 

WARNING 

 

DANGER 

The engine exhaust from this product contains chemicals to cause cancer,birth defects, of other 
reproductive harm. 
Specifications, descriptions and illustrative material in this manual are as accurate as known at the 
time of publication, but are subject to change without notice.Illustrations may include optional 
equipment and accessories, and may not include all standard equipment. 
 

Summary of Contents for KZ-4000MT-PRO-2S























































































































Reviews: