Kasei KZ-4000MT-PRO-2S, Owner'S/Operator'S Manual, Page: 27 / 118

20
Horizontal trimming (Fig. 5)
The best results will be obtained with the blade slightly inclined (5° - 10°) in the direction you are
cutting, proceed with a curved movement, slowly and without interruptions, especially in the case
of very thick hedges.
LUBRICATING THE BLADES DURING JOBS(Fig. 6)
If the cutting device gets excessively hot during operations,grease the blade's internal surfaces with
the specific oil.
WARNING! This operation must only be performed when the blades have stopped running and
the motor is switched off.