Kasei KZ-4000MT-PRO-2S, Owner'S/Operator'S Manual

Page: 54 / 118

45
Taking Care of the Guide
●
Turn the bar over – every time you sharpen the chain and every time you replace the
chain – this helps avoid one-sided wear, especially at the nose and underside of the bar.
●
Regularly clean the oil inlet hole (1),the oilway (2) and the bar.If groove depth is less
than specified: Replace the guide bar.The drive link tangs will otherwise scrape along
the bottom of the groove –the cutters and tie straps will not ride on the bar rails groove (3).
●
Measure the groove depth – with the scale on the filing gauge (special accessory) – in
The area used most for cutting.
WARNING!
Before every cutting, mark sure that the cutting attachment stops turning when
the engine idles.