English
5.906-736.0 Rev. 00 (07/15)
91
The maintenance flap on the right must be dismantled for
service tasks on the thermostat switch emission tempera-
ture or at the filling level sensor and the fuel lines of the die-
sel tank.
1 Maintenance flap on the right
Pull the cable off the ignition transformer at the burner
cover.
Unscrew the 6 screws for the fastening of the mainte-
nance flap on the air casing.
ATTENTION
Risk of damage to equipment. Ensure that the cables are
not damaged upon unthreading.
Unthread the maintenance flap.
ATTENTION
Risk of damage to equipment. The exhaust temperature
sensor in the chimney is connected to the thermostat
switch with a capillary tube. This tube must not be kinked,
as otherwise the sensor will be damaged!
1 Expansion tank motor coolant
2 Screw
NOTE
If necessary, unscrew a screw from the expansion tank
und swivel the container away from the maintenance flap.
10.7 Dismantling the maintenance flap on the right
Summary of Contents for HDS 9/50 De Tr1
