English
5.906-736.0 Rev. 00 (07/15)
35
Turn off the appliance.
Make a note of the position of the service switch.
Set the service switch to Service.
Turn on the appliance.
Set temperature regulator to the relevant temperature.
30°C - behaviour after 45 minutes continuous operation
or continuous break.
35°C - test flame sensor, display brightness value
40°C - manual switch-on/off of the actuators.
45°C - test temperature sensor booster heater. Indica-
tion temperature.
50°C - function check service switch.
55°C - input test of the signals (switching status of the
sensors).
60°C - indication fault memory and software version.
65°C - service diesel engine.
70°C - service pump.
75°C - service burner.
80°C - service gun.
Turn off the appliance.
Bring the service switch back into the position taken
down before.
Turn on the appliance.
NOTE
The service indicators for motor, pump, burner and gun are
deleted if SET is held down with the corresponding tem-
perature indicator upon switch-on.
The number of maintenances is increased by 1 here.
8.7.1
Quick overview for reading the service functions
8.7.2
Set up the switching off process
Display
Explanation
Remark
30?
Switch-off after 45 minutes of continuous operation
or continuous break is activated.
Switching with SET
NOTE
Switch-off after 45 minutes
with fault message 14 or 15.
Switch-off after 45 minutes of continuous operation
or continuous break is not activated (factory set-
ting).
Switching with SET
8.7.3
Brightness value of the flame sensor
Display
Explanation
Remark
35?
Test flame sensor. Display brightness value.
0-400: bright
401-1023: dark
Summary of Contents for HDS 9/50 De Tr1
