8
English
5.906-736.0 Rev. 00 (07/15)
Mobile hot water high-pressure cleaners in various perfor-
mance classes for commercial use.
–
High-performance burner with an upright heating coil
–
Built-in calcification protection
–
Burner blower and fuel pump with separate DC motor
–
A diesel engine for all performance classes:
Water-cooled diesel engine (Yanmar 3 TNV76),
19.2 kW / 3200 1/min, 3-cylinder, 4-stroke, with electric
start starter
Diesel engine with monitoring of the oil pressure and
the temperature of the coolant, start with preheating
–
1 fuel tank (100 l) for diesel engine and burner
–
2 x 250 l water storage tanks
–
1 x 35 litre float container
–
HDS 9/50 De Tr1
–
HDS 13/35 De Tr1
–
HDS 13/20 De Tr1
–
HDS 17/20 De Tr1
–
3-piston crankshaft pump with ceramic sleeve
–
Cylinder head made of brass
–
High-pressure and suction valve faces made of stain-
less steel
–
Working pressure: 20-50 MPa (200-500 bar)
–
Water quantity: 900-1,700 l/h
–
Manometer
–
Overflow valve
–
Float tank
–
Safety block with safety valve and flow switch
–
2 water filters
–
Program selection switch
–
Flame sensor
–
Water temperature regulation with temperature sensor
–
Exhaust temperature monitor
–
Water shortage safeguard (by means of pressure
switch and flow switch)
–
Dry-run protection for the pump
–
Temperature monitoring float container
–
Motor monitoring (oil pressure and temperature of the
coolant)
–
Level switch for liquid softener and detergent tank (op-
tion in some cases)
–
Level sensor for fuel tank
–
Operating hour counter
–
Counter for maintenance intervals for motor, pump,
burner, and gun
–
Error memory
–
Component tests
–
Fault monitoring
Only for devices 13/20 and 17/20:
–
1 Detergent can
–
Detergent inlet with fine filter
–
Dosing valve on the device with control of the suction
via solenoid valve
–
Detergent in high pressure
Accessories for HDS 9/50
–
Industrial trigger gun 650 bar, 3000 l/h
–
Stainless steel spray lance, 700 mm, 650 bar
–
Power nozzle (stainless steel), 15° 030
–
HP hose 620 bar, 30 metres, DN8
Accessories for HDS 13/35
–
Industrial trigger gun 650 bar, 3000 l/h
–
Stainless steel spray lance, 700 mm, 650 bar
–
Power nozzle (stainless steel), 15° 051
–
HP hose 620 bar, 30 metres, DN10
Accessories for HDS 13/20
–
Gun with control knob
–
Stainless steel spray lance, 1050 mm, rotating
–
Power nozzle (stainless steel), 25° 075
–
HP hose, 30 metres, DN8
Accessories for HDS 17/20
–
Gun with control knob
–
Stainless steel spray lance, 1050 mm, rotating
–
Power nozzle (stainless steel), 25° 090
–
HP hose, 30 metres, DN10
6
Technical Features
6.1
General
6.2
Field of application
6.3
Pump
6.4
Electronics system
6.5
Detergent
6.6
Accessories
Summary of Contents for HDS 9/50 De Tr1
