110
English
5.906-736.0 Rev. 00 (07/15)
1 Pump casing
2 Oil filling nozzle
3 Overflow
4 Speed control idle mode / full load
5 Pressure switch
6 Valve set frost protection
7 Pump head
8 Outlet return line to the float container
9 Outlet high pressure
NOTE
The following pictures apply exemplarily! If the various
pump types differ, the relevant shots are illustrated.
1 Pump casing
2 Cover filling hole
3 Oil drain screw
4 Oil sight glass
Check the oil level in the oil-level gauge of the pump
casing.
If the oil level is below the oil looking glass, add oil.
Fill the appropriate amount of oil into the filling hole.
Check the oil level as described above.
Repeat this procedure as often as necessary until the
oil level is in the centre of the oil looking glass.
11.9.1 Check oil level and refill oil
prescribed oil grades
Pump gear
350/500bar pump: SAE 90
200bar pump: 15 W40
Summary of Contents for HDS 9/50 De Tr1
