148
English
5.906-736.0 Rev. 00 (07/15)
1 Exhaust
Unscrew the burner cover.
Pull out the temperature sensor emission temperature.
Unscrew the coolant container and ignition transformer.
Unscrew the exhaust pipe from the muffler.
Uninstall the burner blower completely with the con-
sole.
View from below
1 Screw
2 High-pressure line from the booster heater to the high-
pressure connection
3 High-pressure line from the safety block to the boiler
Dismantle the PVC protective plate on the right.
Remove the high-pressure line from the booster heater
to the high-pressure connection.
Detach the connection of the high-pressure line from
the safety block.
Unscrew 9 screws on the girth of the booster heater.
NOTE
This concerns all screws in this area of which the screw
heads are visible - no nuts!
Unscrew 2 screws at the air casing.
Lift the booster heater out of the motor compartment to-
wards the front.
ATTENTION
When using lifting gear, ensure that the cover is not dam-
aged.
11.12.7 Dismantling the booster heater
Summary of Contents for HDS 9/50 De Tr1
