English
5.906-736.0 Rev. 00 (07/15)
51
Low-pressure hose drum
1 Water supply hose
2 Brake lever
Connection to an external water supply is established by
means of the water supply hose DN19, connection, max.
length: 30 metres
To unroll or roll up the hose, the brake must be released.
For this purpose, open the brake lever in the counter-
clockwise direction.
NOTE
Ensure an even distribution of the hose when rolling it up.
Finally lock the hose reel by locking the brake lever in the
clockwise direction.
1 Ball tap
2 Water filter
3 Low-pressure hose drum
The inflowing water is freed from rejects by means of a fil-
ter prior to further use.
In normal operation the ball tap must be set to "operation"
(horizontal position).
Float container, illustration with dismantled liquid softener
container
1 Filler neck
2 Swimmer ball
3 Water inlet
NOTE
The filling level indicator does not show the water level in
the float container, but the level in the two 250 l water
tanks.
Float tank
The float container is integrated in the left water tank. It is
located underneath the liquid softener tank.
The swimmer reservoir supplies the pump evenly with wa-
ter. It is also used to separate the water inlet and the pump
and prevents detergent from entering the water supply line
in case of damage.
The filling of the two 250-litres water tanks also takes place
through the float container.
Float valves
Water flows into the float container through the two opened
float valves.
When the water level is rising, the relevant float ball rises
and closes the associated float valve.
The float valve is adjusted permanently and must not be
readjusted.
Due to the high volume flow of up to 1700 l/h, two float
valves are necessary.
9.9
Water inlet
9.10 Swimmer tank
Summary of Contents for HDS 9/50 De Tr1
