background image

OPERATOR’S MANUAL

Manual del operador

2200 pSI preSSure WaSHer

lavadora a preSIón de 2 200 pSI

PS80516B

SAVE THIS MANUAL FOR FUTURE REFERENCE

Your pressure washer has been engineered and manufactured to our high standard for dependability, ease of operation, 
and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.

WARNING:

 

To reduce the risk of injury, the user must read and understand the operator’s manual before using 

this product.

Thank you for your purchase.

GUARDE ESTE MANUAL PARA FUTURAS CONSULTAS

Su lavadora a presión ha sido diseñada y fabricada de conformidad con las estrictas normas para brindar fiabilidad, facilidad 
de uso y seguridad para el operador. Con el debido cuidado, le brindará muchos años de sólido y eficiente funcionamiento.

ADVERTENCIA:

 

Para reducir el riesgo de lesiones, el usuario debe leer y comprender el manual del operador 

antes de usar este producto.

Le agradecemos su compra.

To register your POWERSTROKE product, please 

visit: http://register.powerstroketools.com/ 

Para registrar su producto de POWERSTROKE, por 

favor visita: http://register.powerstroketools.com/

Customer serviCe

serviCio AL CLieNte

usA: 1-877-617-3501

mexico: 01 800 843 1111

www.powerstroketools.com

NOTICE          AVIS          AVISO

Do not use E15 or E85 fuel (or fuel 

containing greater than 10% ethanol) 

in this product. It is a violation of fed-

eral law and will damage the unit and void your warranty.

Ne pas utiliser d’essence E15 ou E85 (ou un carburant 

contenant plus de 10 % d’éthanol) dans ce produit. Une 

telle utilisation représente une violation de la loi fédérale et 

endommagera l’appareil et annulera la garantie.

No utilice combustibles E15 o E85 (ni combustibles que 

contengan más de 10 % de etanol) con este producto. Esto 

constituye una violación a la ley federal, dañará la unidad 

y anulará la garantía.

Summary of Contents for PS80516B













































Reviews: