background image

W

W

W

W

W i n P a s s   R e f e r e n c e   M a n u a l

i n P a s s   R e f e r e n c e   M a n u a l

i n P a s s   R e f e r e n c e   M a n u a l

i n P a s s   R e f e r e n c e   M a n u a l

i n P a s s   R e f e r e n c e   M a n u a l

DN1237-0003  ©  1997-2000  Kantech  Systems  Inc.

4 0

4 0

4 0

4 0

4 0

Logical Components Configuration

SECTION  6

SECTION  6

SECTION  6

SECTION  6

SECTION  6

This section is used to define the logical components of the WinPass system. It is used to define:

1)

Schedules: define the start and end times,

2)

Access levels: associate doors with schedules,

3)

Holidays: define holidays,

4)

Event parameters: define events with components, acknowledging schedule, printing
schedule, priority, display color (on the monitor),

5)

System operator: login name, name, security level, password, login schedule and language,

6)

Operator security levels: define if components can be viewed, modified, deleted or created
by the operator who will be assigned this level of security.

Summary of Contents for WinPass KT- 300




































































































Reviews: