W
W
W
W
W i n P a s s R e f e r e n c e M a n u a l
i n P a s s R e f e r e n c e M a n u a l
i n P a s s R e f e r e n c e M a n u a l
i n P a s s R e f e r e n c e M a n u a l
i n P a s s R e f e r e n c e M a n u a l
DN1237-0003 © 1997-2000 Kantech Systems Inc.
2 8
2 8
2 8
2 8
2 8
Physical Components
Configuration
SECTION 5
SECTION 5
SECTION 5
SECTION 5
SECTION 5
This section is used to configure the physical components of the WinPass system. It is used to
define:
1)
The workstation parameters: card format, port settings, log printer, duress function, time
changes, keypad delays, etc.,
2)
The controller parameters: type, serial number, reader/keypad type, Anti-Passback, assign
expansion modules, set dip switches, communication port, tamper & AC schedules, etc.,
3)
The door parameters: door type (entry/exit), reader or keypad, locked state, unlock
schedule, keypad schedule, activate relays on door events, interlock schedule, REX
schedule, etc.,
4)
The relay parameters: normal state, activating schedule, activation period, etc.,
5)
The input parameters: normal condition, shunt delay, relay activated by input, monitoring
schedule, etc.,
6)
The output parameters: normal state, flash time, select how events will trigger the outputs,
etc.