24
25
EN
Juice Dispenser FSD4000
© K. & M. Holland GmbH
© K. & M. Holland GmbH
Juice Dispenser FSD4000
EN
Subject to technical change without prior notice! Version 2.0, 11/2017
Subject to technical change without prior notice! Version 2.0, 11/2017
7. Operation
7.1 Requirements for the operation
n
Switch on the juice dispenser
n
The juice dispenser is in factory-resetting mode
n
Error reporting is not activated
IMPORTANT
If the juice dispenser will not be used for an extended period of time, remove the
Bag-In-Box packs. This will prevent the accumulation of mould fungi. Switch off the
juice dispenser. Disconnect the mains power plug and leave the door open to prevent the
build-up of odours inside the dispenser.
CAUTION
Risk of falling or slipping due to leaking pipes or overflowing drip tray.
7.2 Condensation water
The condensation water from the evaporator is channelled into the condensation water evapo-
ration tray where it is heated by and the hot gas and evaporates. The condensation line is de-
signed based on Central European standards regarding normal ambient temperatures and re-
lative humidity.
IMPORTANT
If the amount of condensation water is excessive due to high relative humidity or
an increased air exchange inside the cooling area, a direct condensation water drai-
nage line must be installed.
7.3 Control unit and button unit
A cyclic communication takes place between the control unit and the button unit. The key
events of the button unit are read by the control unit. The number of buttons is programmed in
hardware. The communication between the button unit and the control unit has a version iden-
tifier, which guarantees one compatibility after extensive software updates.
