Country-
spec. Set-
tings
Level Display/
Setting
Action in this menu/meaning
4
1
2
3
4
Upload/download
NOTE: Opportunity to save log files and save and import parameter
data
Download service log
data
F
Save service log data to external storage media.
Download service log
data without yields
F
Save log data without yields to external storage media.
Download a set of
parameters
F
Save a set of parameters to external storage media.
Document a set of
parameters
F
Issue or print documentation of a set of parameters as a PDF.
Transfer a set of para-
meters
F
Load a set of parameters from external storage media.
4
1
2
3
4
Analyze Log Data
NOTE: All measurement data can be transferred to a USB stick by mak-
ing individual and multiple selections.
User logs
cosPhi | fac (Hz) |
lac 1 (A) | lac2 (A) |
lac3 (A) | idc (A) | Qac
(var)
1 Select a date in the calendar.
2 Select measurement data from the dropdown field.
3 Update the measurement data.
4 Move the selected measurement data to the storage device or
move the data selectively.
NOTE
With regard to the selection of country settings, KACO new energy attests:
›
that the relevant certificates are only valid if the corresponding country settings have been selected.
›
that all configured grid parameters must be configured in accordance with the requirements of the
grid operators.
›
that the configuration of parameters using IEEE 1547: 2003 table 1 is possible but is only permitted if it
is requested by the grid operators.
9.4
Monitoring the device
The device has an integrated web server. This permits the monitoring and configuration of the device.
USB interface
Use an external USB storage device to read operating data saved on the device.
Web server
This device has an integrated web server. After configuring the network and activating the web server in the Settings
menu, you can open the web server from an internet browser. The language version of the website delivered by the web
server is adapted dynamically to the pre-set language preferences in your Internet browser. If your Internet browser re-
quests a language that is unknown to the device, the web server uses the menu language set in the device.
↻
You have connected the device to your network.
1 When using a DHCP server: Activate DHCP.
2 For manual configuration (DHCP off):
3 Open the Settings/Network menu.
4 Assign a unique IP address.
5 Assign a subnet mask.
6 Assign a gateway.
KACO blueplanet gridsave 50.0TL3-S
Page 48
EN