Country-
spec. Set-
tings
Men
u
level
Display/
Setting
Action in this menu/meaning
BE CH-NS
CY DE-NS
DK LU-NS
4
1
2
3
4
Overvoltage shutd. Av-
erage value over ten
minutes Password pro-
tection
1 Activate or disable password protection.
2 Specify the shutdown threshold for overvoltage shutdown.
ð
The 10-minute average for the measured voltage as per
EN50160 is used.
3 Set period from occurrence of the fault to shutdown of the device.
AT FR-OLD
FR-VFR13
FR-VFR14
JP-50HZ
JP-60HZ
UD
4
1
2
3
4
Voltage drop
NOTE: The voltage drop between the device and the feed-in meter is
added to the limit value that was set for grid shutdown according to
EN 50160. The limit value can be set to 0-11 Volt increments.
F
Specify the shutdown value for the voltage drop (0-11 Volt).
BE CH-NS
CY DE-NS
DK LU-NS
4
1
2
3
4
Switch-off volt.
NOTE: The device is equipped with redundant 3-phase monitoring. If
the grid voltage exceeds or drops below the configured values, the
device switches off. The minimum switch-off threshold can be set in
1 Volt increments.
1 Configure the switch-off values for undervoltage and overvoltage.
2 Where applicable, set period from occurrence of the fault to shut-
down of the device.
AT, AU, BG,
CH—MS,
CZ, DE-MS,
ES, FR, GB,
GR, HR,
HU, IE, IL,
IN, IT, JO,
JP, KR,
NL,PL, PT,
RO, TH,
TR,TW, DU,
ZA
4
1
2
3
4
Overvoltage shutd.
1 Specify the shutdown threshold for fast and slow overvoltage shut-
down.
2 Set period from occurrence of the fault to shutdown of the device.
See Over-
voltage
shutd.
4
1
2
3
4
Undervoltage shutd.
1 Specify the shutdown thresholds for fast and slow overvoltage shut-
down.
2 Set period from occurrence of the fault to shutdown of the device.
AT, AU, BG,
CD-MS, CZ,
DE-MS, ES,
FR, GB, GR,
HR, HU, IE,
IL, IN, IT,
JO, JP, KR,
NL, PL, PT,
RO, TH, TR,
TW, DU, ZA
4
1
2
3
4
Overfreq. shutd.
F
Set limit value for the slow and fast overfrequency shutdown.
}
Page 000
]
4
1
2
3
4
Underfreq. shutd.
F
Set limit value for the slow and fast underfrequency shutdown.
KACO blueplanet gridsave 50.0TL3-S
Page 36
EN