Kaco blueplanet gridsave 50.0TL3-S Series, Manual, Page: 34 / 83

Country-
spec. Set-
tings Men
u
level Display/
Setting Action in this menu/meaning
4 1 2 3 4
Activation mode NOTE: Re-activation depends on the operating mode selected and on
the activation conditions.
F
Activate function for a cycle
4 1 2 3 4
Monitoring time F Set time span during which the power threshold must be exceeded
without interruption.
4 1 2 3 4
Power threshold F Set power threshold from which the monitoring time up to activation
begins.
4 1 2 3 4
Operation mode F Power-dependent: the function remains active until below the set
power threshold.
4 1 2 3 4
Operation time NOTE: The menu option is only available in "Time-dependent" opera-
tion mode.
F After connection, the function is active for the set operation time.
4 1 2
3
4
Quick start F Reduce the waiting times during the self-test by pressing
the
Activate
button.
4 1 2
3
4
Logging interval F Specify the time period between 2 log data recordings.
4 1 2
3
4
Log data backup NOTE: The device supports the backing up of all recorded yield data to
a connected USB storage device.
F Activate or disable log data backup.
4 1 2 3 4
Display 1 Configure the contrast setting for the display.
2 Set the length of time without user input after which the backlight-
ing of the LCD switches off.
3 Alternatively: Permanently activate or disable the backlighting by
selecting "
On
" or "
Off
".
4 1 2 3 4
Date & time NOTE: For self-diagnostics, the device performs a restart on a daily
basis at 0:00 hours. To avoid having a restart occur during feed-in op-
eration and to always obtain reliable log data, ensure that the time is
correctly set.
F Set the date and time.
4 1 2 3 4
Network Open the menu: Press the
Right arrow button
or
Enter but-
ton
.
4 1 2 3 4
DHCP
On / Off
NOTE: The "IP address", "Subnet mask", "Gateway" and "DNS-Server"
menu options are only displayed with DHCP disabled.
F Activate or deactivate DHCP.
On: Once the DHCP server becomes available, the IP address, subnet
mask, gateway and DNS server are automatically applied and the afore-
mentioned menu options are hidden.
Off: Apply settings manually.
4 1 2 3 4
IP address
F
Allocate a unique IPv4 address in the network.
4 1 2 3 4
Subnet mask F Assign a subnet mask.
4 1 2
3
4
Gateway F Enter IPv4 address of the gateway.
4 1 2 3 4
DNS server
F
Enter IPv4 address of DNS server.
4 1 2 3 4
Web server F Open the menu: Press the
Right arrow button
or
Enter
button
.
4 1 2 3 4
Operation mode
F
Activate or disable the integrated web server.
4 1 2 3 4
Port F Set the port at which the web server can be reached.
KACO blueplanet gridsave 50.0TL3-S Page 34
EN