PAXOS advance Series
II_PAXOS_V001_20161007_EN 61
Installation Instructions
Addressing/functional check of the system
If the boltwork is not opened, the locks will automatically close again after a certain amount of
time.
8.
Close (step 1) and open (step 3 to 7) all of the locks at least two more times to ensure
the reliability of the redundant system parts is checked. If all of the locking and opening
processes up to this point have been completed without any fault messages, the door can
actually be locked. Otherwise, resolve any faults and repeat the functional checks.
The system is now ready to be commissioned by the customer. The opening code Oca.. is enabled
on all of the locks and is set to factory code “10203040” (“0010203040“ with ID+PIN mode). Fur-
ther information is included in the Operating Manual for Paxos advance.
CLAVIS Deutschland GmbH
Grüner Weg 38
34117 Kassel
Telefon: +49 (0)561 988 499-0
E-Mail: [email protected]
Internet: www.tresore.eu
www.tresorschloss.de
Customer Service
Summary of Contents for PAXOS advance Series
Page 62: ......