manualshive.com logo in svg

Kaba PAXOS advance Series, Installation Instructions Manual, Page: 5 / 62

Share
Download
Kaba PAXOS advance Series Installation Instructions Manual Download Page 5

PAXOS advance IP

 II_PAXOS_V001_20161007_EN 5

Installation Instructions  

About this Operating Manual

1 

About this Operating Manual

1.1 

Introduction

The fully redundant electronic high-security locking system 

PAXOS advance IP

 

(Paxos advance for 

short)

 is designed in accordance with the latest technology and meets all known safety standards. 

Nevertheless, improper operation of the electronic high-security locking system Paxos advance

 

can lead to material damage or physical injury.
To ensure a safe, proper and economical operation of the electronic high-security locking system

 

Paxos advance

, 

observe and comply with all of the information and safety instructions in these 

Installation Instructions and the instructions for the components that are used together with the 

locking system.
If you have questions, which are not or insufficiently answered in these Installation Instructions, 

please contact your business partner. They will be glad to assist you.

1.2 

Validity/limitation

These Installation Instructions describe the installation and functional control of the different 

designs of the electronic high-security locking system Paxos advance

 

and the relevant available 

options.

1.3 

Target group

These Installation Instructions are intended for highly skilled and trained personnel, who are 

entrusted with the installation and functional checks of the electronic high-security locking 

system Paxos advance.
The description presumes that trained specialist personnel are working on the system and does 

not replace product training.

1.4 

Limitations

The information included in these Installation Instructions is limited to the controls and 

configuration of the electronic high-security locking system Paxos advance.
The available options (I/O-Box, IP-Box, AS384 Management-Suite Software) are only described 

insofar as required for the proper operation of the electronic high-security locking system Paxos 

advance. Further information on the optional AS384 Management-Suite Software can be found 

in the quick start guide and help function of the software.

1.5 

Additional documentation

These Installation Instructions are supplemented by the Operating Manual and the Quick Start 

Guide for the electronic high-security locking system Paxos advance.

Summary of Contents for PAXOS advance Series































































Reviews:

No comments