PAXOS advance Series
II_PAXOS_V001_20161007_EN
29
Installation Instructions
Installation
2.
Firmly screw the lock to the door body with three hexagon socket head screws M6x25 mm
or longer (or the equivalent in inches) with a quality of at least 8.8 (screw length according
to local conditions). The tightening torque must not exceed 500 Ncm at a minimum usable
screwing depth of 5 mm.
The mounting screws must be secured against loosening by using a screw cement (e.g. LOCTITE
243 blue, medium strength).
3.
Repeat steps 1 and 2 for all of the door and inner compartment locks.
Mounting the carrier adapter
If other parts of the boltwork are to be connected to the lock (e.g. for activating blocking disks),
corresponding adapters can be fixed to the front of the lock bolt with two screws (M4) or a centric
screw (M5) (maximum tightening torque of 200 Ncm for 6 mm screwing depth).
During this process, it must be ensured that all moving parts can move freely and especially that
the set guided path of the lock bolt is not restricted by stops or other objects in the boltwork. The
M5x12
M4x12
lock bolt must also have some play in the end positions.
Mounting the carrier adapter
Summary of Contents for PAXOS advance Series
Page 62: ......