56 II_PAXOS_V001_20161007_EN
PAXOS advance Series
Electrical Installation
Installation Instructions
Terminal
Description
Capacity/Comments
11 (NC) / 12 (COM) / 13 (NO) Output 3
Standard: Tamper resistance
surveillance input
Voltage load at the output:
Max. 24 VAC
Current load at the output:
Max. 0.4 A at 25°C
Max. 0.3 A at 50°C
NO (13)
NC (11)
COM (12)
ext.
IP-Box
Note: the standard setting (NC and
COM connected) can be changed
via the AS384 Management-Suite
Software, if the standard (see
description in the table) does not
apply.
14 (VCC) / 15 (GND)
External
power supply
(always required for the IP box)
Note: if a locking system
comprises IP and I/O boxes the
external power supply must be
connected to the IP box.
12 VDC ... 24 VDC / 700 ... 200 mA
12...24 VDC (14)
IP-Box
ext.
GND (15)
A
S3
8
4
AS384 Management-Suite Software
The input and output functions can be reconfigured with the AS384 Management-Suite
Software. This can also determine which inputs need to be connected to a tamper monitoring
circuit (ex work, only input 1 is configured for connection to a tamper monitoring circuit).
In addition, with the AS384 Management-Suite Software the Paxos advance locking system can
be configured for use with an IP network.
Summary of Contents for PAXOS advance Series
Page 62: ......