manualshive.com logo in svg

Kaba PAXOS advance Series, Installation Instructions Manual, Page: 54 / 62

Share
Download
Kaba PAXOS advance Series Installation Instructions Manual Download Page 54

54 II_PAXOS_V001_20161007_EN 

PAXOS advance Series

Electrical Installation 

Installation Instructions

5.4 

External connections to the IP-Box

5.4.1  Assigning IP-Box terminals and the Ethernet interface

The IP-Box has three inputs and outputs for the power supply and an Ethernet interface.

The IP-Box functions are only available in its entirety, if the IP-Box is connected to an external 

power supply. In case of a power failure the batteries in the input unit ensure the lock functions 

over a limited period of time, but not the entire functions of the IP-Box.

IP-Box terminal assignment and Ethernet interface

Note on network safety:

It is recommended to operate the lock systems (IP-Boxes) only within protected firm networks.

NC COM NO

VCC

GND

11 12 13

14 15

IN1 GND IN2 GND IN3

1 2 3 4 5

GND OUT1 OUT1 OUT2 OUT2

6

7 8 9 10

7 mm

OUT3 POWER

Summary of Contents for PAXOS advance Series































































Reviews:

No comments