24 II_PAXOS_V001_20161007_EN
PAXOS advance Series
Installation
Installation Instructions
4.
Route the bus cables “A” and “B” from the lock chamber through the cable feed through to
the input unit until they project approximately 100 mm from the side of the input unit.
CAUTION
To ensure the bus cables are not damaged deburr sharp edges and install additional protective
sheaths arround cables.
5.
Insert the two bus cables “A” and “B” according to the following diagram into the print of the
input unit (bus cable A --> A-OUT, bus cable B ---> B-OUT).
6.
Unscrew set bolt “C” of the input unit until the end of the set bolt is level with the upper part
of mounting clip “D”.
Connecting bus cables “A” and “B”
A-OUT
B-OUT
C
D
E
A
B
E
Summary of Contents for PAXOS advance Series
Page 62: ......