How to Open the Settings
Page
1
Enter the URL of camera in the address
bar of Internet Explorer
0
The factory default URL is
“http://192.168.0.2”.
Memo :
0
For details on the IP address to specify for the
URL of the camera, refer to the following.
P32 [IP Address Setting Procedure] )
2
Enter the user name and password.
0
The factory default is “admin” and “jvc”.
0
After entering a correct user name and
password, the Built-in Viewer of the camera
is displayed.
.
3
Click [Details].
0
[Basic Setting1] page will be opened if
accessed by user name “admin”.
0
[Basic Setting2] page will be opened if
accessed by user name “operator”.
0
[Miscellaneous] page will be opened if
accessed by user name “user”.
Built-in Viewer Menu List
The following items can be set. Depending on the
logged-in user name, some items may not be set
due to the access authorization. In such case,
items won’t be displayed.
[Basic Setting1] (*1) ..................................... P 38
[Basic Setting2] (*2) ..................................... P 39
[Advanced Settings] .................................... P 41
-
[Camera] (*2) ........................................... P 41
-
[Encoding] (*2) ........................................ P 45
-
[Alarm] (*2) .............................................. P 48
-
[Alarm Environment] (*2) ......................... P 50
-
[Alarm Output] ..................................... P 51
-
[FTP Recording] (*2) ............................... P 52
-
[PTZ] (*2) ................................................. P 54
-
[Limit] ................................................... P 54
-
[Preset Position Speed] ....................... P 55
-
[Auto Flip] ............................................ P 55
-
[Auto Patrol] (*2) ...................................... P 56
-
[Privacy Mask] (*2) .................................. P 57
-
[Motion Detection] (*2) ............................ P 59
-
[Tampering Detection] (*2) ...................... P 60
-
[Network] (*1) .......................................... P 61
-
[IP Setting] ........................................... P 61
-
[Other] ................................................. P 61
-
[Protocol] (*1) .......................................... P 62
-
[Multicast] (*2) ......................................... P 64
-
[Time] (*1) ............................................... P 65
-
[Password] (*1) ........................................ P 66
-
[Maintenance] (*1) ................................... P 67
-
[Miscellaneous] ....................................... P 68
-
[Operation] (*2) ........................................ P 68
-
[Operation] .......................................... P 68
-
[Log] .................................................... P 68
-
[Settings] (*2) .......................................... P 69
-
[Position List] (*2) .................................... P 69
-
[Patrol Settings] (*2) ................................ P 70
*1 Displayed if logged in by user name “admin”.
*2 Displayed if logged in by user name “admin”
or “operator”.
How to Open the Settings Page
37
Se
tti
ng
Us
in
g In
ter
net
E
xplor
er
