[PTZ] Page
This page allows you to specify the Auto Return,
Move Preset Position and Auto Flip settings.
This page can be used during access using
“admin” or “operator”.
0
Click [Advanced Settings] in the side menu, and
click [PTZ].
0
Press the [OK] button to enable the new
settings.
0
If the [OK] button is pressed upon entering an
invalid value, a warning message will appear
and the entry will be denied. Press the [Cancel]
button to restore the invalid entry to the value
before the change was made. If you press the
[Cancel] button, other changed items will also be
restored to the values before the change was
made.
Settings
.
* Setting values with
R
are default values.
Auto Return
If the manually-controlled camera is not operated
over the duration that was set in “Return Time”, it
will automatically return to the state that was set in
“Mode”.
9
Mode
This item sets the operation after Auto Return.
0
OFF:
Auto Return is disabled.
0
Home:
Returns to the home position.
0
Auto Pan:
Returns to the Auto Pan operation.
0
Auto Patrol0 to 2:
Returns to the Auto Patrol operation.
0
Auto Trace:
Returns to the Auto Trace operation.
[Set values:
R
OFF, Home, Auto Pan, Auto Patrol0
to 2, Auto Trace]
9
Return Time
This item sets the time to return the operation with
Auto Return.
[Set values:
R
1, 2, 3, 5, 10, 20, 30, 60] minutes
9
Test
Click [Execute] to test run the configured Auto
Return operation.
Limit
9
EZoom Limit
When the zoom lens is operated to TELE side,
optical zoom works and electronic zoom works
after optical zoom becomes full. This item sets the
maximum value of the electronic zoom function.
[Set values: 1,
R
2, 4, 8, 10]
Memo :
0
As electronic zoom processes the images
digitally, image quality will deteriorate slightly
0
Increasing the electronic zoom ratio will shift the
center of the screen toward the top left. This is a
characteristic of this camera and is not a
malfunction.
0
During continuous zoom operation, there is a
one-second pause when the electronic zoom
switches to optical zoom. This is intended to
mark the boundary between electronic and
optical zoom, and is not a malfunction.
9
Pan Limit
This item sets the movable range of the pan
(horizontal) operation during manual operation
when “ON” is selected. It is invalid when “OFF” is
selected.
[Set values: ON,
R
OFF]
0
[Set Left], [Set Right]:
Click these buttons to set the current position to
the left or right edge.
0
[Go to Left], [Go to Right]:
Click these buttons to move the camera to the
preset left or right edge.
Memo :
0
It does not affect the Preset Position, Auto Pan,
Auto Trace, and Auto Flip operations.
54
[Advanced Settings] Page - [PTZ] Page
Se
tti
ng
Us
in
g In
ter
net
E
xplor
er
