[PTZ Settings]
This item sets the PTZ functions.
This page can be used during access using
“admin” or “operator”.
0
While another menu is open, click [Control] to
switch to the Control Menu. Click [PTZ
Settings] to open the Settings screen.
Preset Position
Sets the camera preset position.
0
Point the lens in the shooting direction using the
pan, tilt, or zoom operation. Select a position
number, followed by inputting a position title.
Next, click [Register] to register the position. The
position number is used for alarm trigger,
moving to a specific position, and the position
settings of Auto Patrol.
0
When [Auto Flip] is set to “Digital Flip”, preset
positions cannot be registered when the tilt
angle is more than 90 degrees.
Memo :
0
This product enables setting up to 100 preset
positions, including HOME and 1 to 99.
0
When setting preset positions and [Pan Limit] is
“ON”, pan operation is unavailable in the
prohibited areas.
0
As moving preset positions has priority over pan
limit, set the preset positions when [Pan Limit] is
“OFF”. After that, when [Pan Limit] is set to “ON”,
the camera will pan regardless of the prohibited
areas.
0
Items that are stored in the preset position
include pan, tilt, zoom, focus, position title, white
balance, iris, and backlight compensation.
.
Position
Selects a Position.
[Set values: HOME, 1 to 99]
Title
Displays the current title.
0
[Title]:
To register or change the title, enter a title here.
(You can input up to 32 characters. However,
the JPEG Viewer only supports display up to 16
characters.)
0
[Register] button:
Click to complete registration of the new
position.
0
[Unregister] button:
Click to delete information on the selected
position.
Memo :
0
Note that you cannot delete the [HOME]
position.
78
[Control] - [PTZ Settings]
Operation
