[Viewer Setup]
[Unicast] Settings
You can set the HTTP port and the JPEG frame rate
in Unicast.
This page can be used during access using
“admin” or “operator”.
0
When the Control Menu is open, click [Viewer
Setup] to switch to the Viewer Setup Menu.
0
Click [Unicast] to open the Settings screen.
0
When you click the [Apply] button, the current
settings are made valid on the viewer and they
are stored in the computer.
Unicast
.
HTTP Port
You can change the port number to be used when
the client computer accesses to the camera via
HTTP.
Set to the same value as [HTTP Server Port] of the
[Protocol] page.
[Factory default: 80]
JPEG Frame Rate
Sets a frame rate for image acquisition by the
viewer.
A high frame rate increases the amount of data
processed by the computer where the viewer is
running.
[Set values: 30 fps, 15 fps, 10 fps, 7.5 fps, 6 fps,
5 fps, 3 fps, 2 fps, 1fps, 1/2 fps, 1/3 fps, 1/5 fps,
1/10 fps, 1/15 fps, 1/20 fps, 1/30 fps, 1/60 fps]
Note :
0
Set the JPEG frame rate so that the CPU load of
the computer does not exceed 80 %.
If the CPU is overloaded, the computer may not
function properly.
0
The highest frame rate for images is the
camera’s encoding setting.
84
[Viewer Setup] - [Unicast] Settings
Operation
