[Protocol] Page
This page sets the protocol.
This page can be used during access using
“admin”.
Memo :
0
Press the [OK] button to enable the new
settings.
0
If the [OK] button is pressed upon entering an
invalid value, a warning message will appear
and the entry will be denied. Press the [Cancel]
button to restore the invalid entry to the value
before the change was made. If you press the
[Cancel] button, other changed items will also be
restored to the values before the change was
made.
0
When you connect via Internet Explorer after
changing protocol settings, enter the address
using the new server port and port number in the
address bar.
Settings
.
* Setting values with
R
are default values.
Server Certificate
For specifying settings related to the server
certificate.
9
Register Information
Pressing the [Information] button displays the valid
server certificate.
.
9
Local Certification
This page is for creating a new server certificate for
local authentication.
Press the [Create Server Certificate] button to
create the server certificate.
Note :
0
Do not use the sample that has been preset for
the server certificate. Make sure that you create
a new server certificate.
.
Memo :
0
The characters that can be input varies with
each item.
Item
Usable Characters
Country Code (2 letter
code)
A-Z
State
a-zA-Z0-9_ .,+/()-
City
Organization
Organization Unit
Common Name
a-zA-Z0-9 .-
Mail Address
a-zA-Z0-9_@.+"#$-
9
Country Code (2 letter code)
Enter the country code of the local certification
authority.
The country code is made up of two Latin
characters specified by the ISO3166-1 alpha-2
standard.
9
State
Enter the state of the local certification authority.
9
City
Enter the municipality of the local certification
authority.
9
Organization
Enter the organization name of the local
certification authority.
9
Organization Unit
Enter the department of the local certification
authority.
62
[Advanced Settings] Page - [Protocol] Page
Se
tti
ng
Us
in
g In
ter
net
E
xplor
er
