JVC VN-H657U, Instructions Manual

Page: 63 / 98

9 Common Name
Enter the administrator name or server’s host name
of the local certification authority.
9 Mail Address
Enter the administrator’s mail address.
Protocol Settings
Sets the protocols.
9 HTTP/HTTPS
For selecting the protocol to use.
[Set values:
R
HTTP, HTTPS]
9 HTTP Server Port
You can change the port number for the built-in
HTTP server of the camera.
[Set values: 11 to
R
80 to 65524]
Memo :
0
To access the camera from Internet Explorer,
input the following into the Internet Explorer
address bar with the camera in the factory
default state.
http://192.168.0.2
When the port number is changed to 8080, input
the new port number after the IP address as
follows.
http://192.168.0.2:8080
Input “:” + port number
0
Upon changing the HTTP server port, the port
number for requesting video stream distribution
will also be changed.
0
Set [HTTP Port] of the Built-in Viewer to the
same value.
(
A
P84 [ HTTP Port ] )
9
HTTPS Server Port
You can change the port number for the built-in
HTTPS server of the camera.
[Set values: 11 to
R
443 to 65524]
Memo :
0
To access the camera from Internet Explorer,
input the following into the Internet Explorer
address bar with the camera in the factory
default state.
https://192.168.0.2
When the port number is changed to 8080, input
the new port number after the IP address as
follows.
https://192.168.0.2:8080
Input “:” + port number
0
Upon changing the HTTPS server port, the port
number for requesting video stream distribution
will also be changed.
9 SNMP
For setting SNMP.
[Set values: ON,
R
OFF]
9
AMX Device Discovery Protocol
You can change the AMX device detection
protocol. Set to “ON” when you are using the
camera on AMX’s system.
[Set values:
R
ON, OFF]
Standard Surveillance Protocol
Sets standard surveillance protocols.
9 ONVIF
You can change the standard surveillance
protocols.
[Set values:
R
ON, OFF]
JPEG Streaming
Selects the JPEG image streaming priority.
9 Priority
Selects whether to give priority to the client number
for JPEG image streaming or the frame rate.
0
Client Number:
Gives priority to the streaming client number.
Lowers the JPEG frame rate as delivery
requests increase, allowing delivery to a
maximum of 20 clients.
0
Framerate:
Assigns priority to the frame rate. Set this to
maintain the frame rate for JPEG images
requested by clients. Delivery requests that
exceed the maximum number will be denied.
[Set values:
R
Client Number, Framerate]
[Advanced Settings] Page -[Protocol] Page
63
Se
tti
ng
Us
in
g In
ter
net
E
xplor
er