Action Position Number
Set the position number to move to when [Action]
item is set to “Position”.
[Set values: 0 to 99]
Memo :
0
Specify the setting for Preset Position in [PTZ
Settings] of Built-in Viewer.
Pin Output1 Make, Pin Output1 Break, Pin
Output2 Make, Pin Output2 Break
0
Alarm Output Duration:
Specify the output time when the [Action] item is
set to “Pin Output1 Make”, “Pin Output1 Break”,
“Pin Output2 Make”, or “Pin Output2 Break”.
[Set values: 0, 100 to 5000]
msec
Trigger Position Number
Set the preset position number to be used as the
trigger when [1st Trigger] is set to “Position”.
[Set values: 0 to 99]
Memo :
0
Specify the setting for Preset Position in [PTZ
Settings] of Built-in Viewer.
Time
Executes an action at the time you have entered.
[Set values: 00
H
00
M to 23
H
59
M]
Time Filter
For specifying the alarm action with respect to each
day of the week and setting the corresponding time
of the day.
0
Applicable day of week:
Sunday, Monday, Tuesday, Wednesday,
Thursday, Friday, Saturday
0
Alarm action:
Unmask All, Mask All, Unmask Span, Mask
Span
0
Applicable time period:
Specify the starting and ending time of the alarm
in hours and minutes.
[Alarm Environment] Page
This page sets up the alarm environment.
This page can be used during access using
“admin” or “operator”.
0
Click [Advanced Settings] in the side menu, and
click [Alarm Environment].
0
Press the [OK] button to enable the new
settings.
0
If the [OK] button is pressed upon entering an
invalid value, a warning message will appear
and the entry will be denied. Press the [Cancel]
button to restore the invalid entry to the value
before the change was made. If you press the
[Cancel] button, other changed items will also be
restored to the values before the change was
made.
Settings
.
* Setting values with
R
are default values.
50
[Advanced Settings] Page - [Alarm] Page
Se
tti
ng
Us
in
g In
ter
net
E
xplor
er
