Juniper HarvestMaster mirus H2, User Manual

Page: 19 / 130

Mirus for H2 Classic GrainGage
19 Mirus and H2 Classic GrainGage Setup
The following tables display the default values for each actuator:
Top Gate Settings
Setup Parameter Default Value Description
Actuator Dual The type of actuator .
Limit Switch on
Close
Yes Enables the limit switch when the gate closes .
Limit Switch on
Open
No
Enables the limit switch when the gate opens . This is not
supported in the H2 Classic .
Open State Time* 400 msec
The amount of time the top gate remains open before
beginning to close . The actual evacuation time is set in
Sensors > Weight > Evacuation Time .
Open Transition
Time*
300 msec The amount of time it takes the actuator to open the gate .
Close Transition
Time*
800 msec The amount of time it takes the actuator to close the gate .
*These settings can only be changed with the help of HarvestMaster Field Service Engineers. See 8.4.2
Contact a HarvestMaster Field Service Engineer on page 128.
Bottom Gate Settings
Setup Parameter Default Value Description
Actuator Dual The type of actuator .
Limit Switch on
Close
Yes Enables the limit switch when the gate closes .
Limit Switch on
Open
No
Enables the limit switch when the gate opens . This is not
supported in the H2 Classic .
Open State Time* 500 msec
The amount of time the bottom gate remains open before
beginning to close . The actual evacuation time is regulated in
Sensors > Weight > Evacuation Time .
Open Transition
Time*
300 msec The amount of time it takes the actuator to open the gate .
Close Transition
Time*
800 msec The amount of time it takes the actuator to close the gate .
*These settings can only be changed with the help of HarvestMaster Field Service Engineers. See
8.4.2
Contact a HarvestMaster Field Service Engineer
on page 128.