Jungheinrich ETX 513, Operating Instructions Manual

Page: 298 / 408

8.12
Working platform (
o
)
The truck operator manual, in chapter E "Safety Regulations for the Operation of
theForklift Truck" under the item "„
Unauthorised use " specifically prohibits the
carrying (travel / lift / lower) of one or more persons on the load handler.
If the truck is equipped with a detachable, approved work platform, in exceptional
cases a person authorised by the owner may be carried in the work platform.
CAUTION!
The work platform is authorised for one person only.
u If a second person is to be carried in the work platform, it must be fitted with an
additional two-hand control system.
The owner / driver must instruct the person(s) carried in the work platform in how to
operate the work platform and point out the hazards.
Example: do not lean out of the work platform while travelling or lifting / lowering.
Z
Operate the work platform only at reduced travel / hydraulic speeds.
WARNING!
The use of working platforms is governed by national law. In some states the use of
working platforms is prohibited on industrial trucks. Observe the applicable law.
Working platforms can only be used in the country of application if the law permits it.
u Contact the national authorities before using a working platform.
WARNING!
Unsuitable work platforms can be hazardous
Do not use work platforms that have not been approved for this truck. Unsuitable
work platforms can slide off the load handler and fall when used with the truck.
u
Use only work platforms that have been approved by the owner.
u
The work platform must be connected both physically and electrically to the truck
at all times during operation.
Z
Maintenance intervals are specified in the section Maintenance, Inspection and
Changing of Maintenance Parts Requiring Replacement, see page 359.
296
04.19 en-GB