Jungheinrich ETX 513, Operating Instructions Manual

Page: 127 / 408

3.1.1 Visual external inspection of the whole truck for damage
Procedure
• Check truck for damage.
• Check mast bracing for damage (
o
).
• Check driver's seat for damage.
• Check driver's seat setting and adjust if necessary (see page 130).
• Make sure panels are secure and check for damage.
• Check the overhead guard for damage.
• Check operator position for damage.
• Check control panel for damage.
• Check control panel setting and adjust if necessary (see page 132 and see
page 133).
• Check operator position padding for damage (
o
).
• Check the operator mat and step boards are non-slip and damage-free.
• Check the tilt safety devices are present (
o
), see page 72.
• Check the load handler (forks etc.) for visible signs of damage such as cracks,
bent or severely worn forks.
• Check static charge eliminator is present.
• If using an attachment: Check bearing points, guides and stops for wear and
damage.
• Check labels are legible and complete, see page 46.
• Check "travel" control labels are legible and complete.
• Check "hydraulic" control labels are legible and complete.
• Check that optional equipment such as mirrors, storage compartments, grips etc.
are working correctly and check for damage (
o
).
• Check overhead guard cover for damage and make sure it is secure (
o
).
125
04.19 en-GB