Jungheinrich ETX 513, Operating Instructions Manual

Page: 274 / 408

Automatic stacking operation with the
"Hydraulic
functions" control lever
(version A)
– Press the deadman button (18).
– Stacking / retrieval can be performed when
the selected nominal height has been
reached.
– Do not press the deadman button (18).
– The
prescribed stacking operation
direction must be confirmed and adhered
to throughout the stacking operation via
the
"Hydraulic functions" control
lever (113):
• "Left" stacking operation = turn the
"Hydraulic functions" control lever (113)
anti-clockwise and hold it down until the
operation is complete.
• "Right" stacking operation = turn the
"Hydraulic functions" control lever (113)
clockwise and hold it down until the
operation is complete.
Z
The hydraulic speeds are fixed and cannot be influenced.
The hydraulic functions stop when the "Hydraulics function" control lever (113) is
released. The stacking operation continues when the "Hydraulic functions" control
lever (113) is applied again.
During the positioning procedure another compartment can be entered. This entry is
shown for approx. 1 sec. in the driver's display and stored in the cache. After
stacking, the shelf is automatically taken from the intermediate log.
Z
The stacking operation can be cancelled by pressing the “CE” button on the
numerical keypad (112) or by pressing the EMERGENCY DISCONNECT switch. No
"Order processed" message is sent to the radio data transmission terminal.
112 113 120 18 119
272
04.19 en-GB