Jungheinrich ETX 513, Operating Instructions Manual

Page: 192 / 408

5.3 Lifting, transporting and depositing loads
WARNING!
Unsecured and incorrectly positioned loads can cause accidents
Before lifting a load unit the driver must make sure that it has been correctly
palletised and does not exceed the truck’s capacity.
u Instruct other people to move out of the hazardous area of the truck. Stop working
with the truck if people do not leave the hazardous area.
u Only carry loads that have been correctly secured and positioned. Use suitable
precautions to prevent parts of the load from tipping or falling down.
u
Do not transport loads other than on the authorised load handler.
u Damaged loads must not be transported.
u If the stacked load obscures forward visibility, then you must reverse the truck.
u Make sure you have enough visibility when reversing.
u
Never exceed the maximum loads specified in the capacity chart.
u Never stand underneath a raised load handler.
u Do not stand on the load handler.
u Do not lift other people on the load handler.
u
Do not reach through the mast.
u Check the fork spread before lifting the load and adjust if necessary.
u Insert the forks as far as possible underneath the load.
WARNING!
Ensure there are no other people standing underneath the raised load and
driver's cab.
u
Do not stand on the load handler.
u Do not lift other people on the load handler.
u Instruct other people to move out of the hazardous area of the truck.
u
Never stand underneath a raised and unsecured load handler / driver's cab.
190
04.19 en-GB