Jungheinrich ETR 314, Operating Instructions Manual

Page: 66 / 261

E 35
0
608
.USA
3.4 Adjusting the fork tines
Q wW
In order to pick up the load
securely, the tines should be
adjusted as far apart as possible
and centered to the vehicle. The
load center must be in the center
of the tines.
– Lift up the stop level (20).
– Move the fork tines (21) on the fork
carrier (22) into the correct position.
– Push the stop lever down and shift the
fork tines until the stop lever snaps
into a notch.
3.5 Raising and lowering load units
IMPORTANT Before lifting a load unit, the
driver must be sure that it is
palleted correctly and does not
exceed the permitted load
capacity of the vehicle.
– Drive the fork tines as far as possible
under the load unit.
21
20
22
E 35
0
608
.USA
3.4 Adjusting the fork tines
Q wW
In order to pick up the load
securely, the tines should be
adjusted as far apart as possible
and centered to the vehicle. The
load center must be in the center
of the tines.
– Lift up the stop level (20).
– Move the fork tines (21) on the fork
carrier (22) into the correct position.
– Push the stop lever down and shift the
fork tines until the stop lever snaps
into a notch.
3.5 Raising and lowering load units
IMPORTANT Before lifting a load unit, the
driver must be sure that it is
palleted correctly and does not
exceed the permitted load
capacity of the vehicle.
– Drive the fork tines as far as possible
under the load unit.
21
20
22