Jungheinrich ETR 314, Operating Instructions Manual

Page: 44 / 261

E 13
0
608
.USA
1.2.4 Error messages on Operator Display
Error Error text Explanation Solution
1 LOW VOLTAGE Undervoltage Check battery voltage;
charge battery
2 HIGH VOLTAGE Overvoltage Check battery voltage
3 TEMPERAT
CONTR TEMPERATURE of the
CONTROLLER Allow the controls to cool
4 VOLTAGE SUPPLY Broken wire, drive
potentiometer Turn off / on, call service
5 ELECTR SYSTEM Overvoltage Turn off / on, call service
6 ACCELERATOR 2 travel directions at the
same time Turn off / on, call service
7 TURN OFF KEY Lock switch Turn off / on, call service
8 ELECTR SYSTEM 2 travel directions at the
same time Turn off / on, call service
9 ELECTR SYSTEM Body circuit breaker
defective Turn off / on, call service
10 MAIN CONTACTOR Main contactor defective Turn off / on, call service
11-19 CONTROLLER Controller error Turn off / on, call service
20 ELECTR SYSTEM Armature attached
incorrectly Turn off / on, call service
21-22 CONTROLLER Controller error Turn off / on, call service
23 CONTROLLER CAN Controller error Turn off / on
24 CONTROLLER Controller error Turn off / on, call service
25 INTERFACE / CAN No logon from the
interface Turn off / on
26 LIFT SENSOR Broken wire, lift
potentiometer Turn off / on, call service
27 STEER ANGLE Broken wire, steering
angle potentiometer Turn off / on, call service
28 SETPOINT ANGLE Broken wire, steering
sensor Turn off / on, call service
29 SHIFT SENSOR Broken wire, shift
potentiometer Turn off / on, call service
30 TILT SENSOR Broken wire, tilt
potentiometer Turn off / on, call service
31 SIDESHIFT SENS Broken wire, ZH1
potentiometer Turn off / on, call service
32 MULTIP SENSOR Broken wire, ZH2
potentiometer Turn off / on, call service
33 MULTIP SENSOR Broken wire, ZH3
potentiometer Turn off / on, call service
34 CAN BUS CANBus disrupted Turn off / on, call service
E 13
0
608
.USA
1.2.4 Error messages on Operator Display
Error Error text Explanation Solution
1 LOW VOLTAGE Undervoltage Check battery voltage;
charge battery
2 HIGH VOLTAGE Overvoltage Check battery voltage
3 TEMPERAT
CONTR TEMPERATURE of the
CONTROLLER Allow the controls to cool
4 VOLTAGE SUPPLY Broken wire, drive
potentiometer Turn off / on, call service
5 ELECTR SYSTEM Overvoltage Turn off / on, call service
6 ACCELERATOR 2 travel directions at the
same time Turn off / on, call service
7 TURN OFF KEY Lock switch Turn off / on, call service
8 ELECTR SYSTEM 2 travel directions at the
same time Turn off / on, call service
9 ELECTR SYSTEM Body circuit breaker
defective Turn off / on, call service
10 MAIN CONTACTOR Main contactor defective Turn off / on, call service
11-19 CONTROLLER Controller error Turn off / on, call service
20 ELECTR SYSTEM Armature attached
incorrectly Turn off / on, call service
21-22 CONTROLLER Controller error Turn off / on, call service
23 CONTROLLER CAN Controller error Turn off / on
24 CONTROLLER Controller error Turn off / on, call service
25 INTERFACE / CAN No logon from the
interface Turn off / on
26 LIFT SENSOR Broken wire, lift
potentiometer Turn off / on, call service
27 STEER ANGLE Broken wire, steering
angle potentiometer Turn off / on, call service
28 SETPOINT ANGLE Broken wire, steering
sensor Turn off / on, call service
29 SHIFT SENSOR Broken wire, shift
potentiometer Turn off / on, call service
30 TILT SENSOR Broken wire, tilt
potentiometer Turn off / on, call service
31 SIDESHIFT SENS Broken wire, ZH1
potentiometer Turn off / on, call service
32 MULTIP SENSOR Broken wire, ZH2
potentiometer Turn off / on, call service
33 MULTIP SENSOR Broken wire, ZH3
potentiometer Turn off / on, call service
34 CAN BUS CANBus disrupted Turn off / on, call service