Jung LB management, Manual

Page: 61 / 196

Mini universal dimmer LED
You can switch and dim incandescent lamps, HV halogen
lamps and electronic or dimmable inductive transformers for
halogen or LED lamps using the Mini Universal Dimmer LED.
The Mini Universal Dimmer LED is operated using a 2-wire
satellite unit with button attachment, push-buttons with
normally open contact or the 3-wire rotary satellite unit.
The Mini Universal Dimmer LED can be installed in a commer-
cially available device socket (e.g. Kaiser 1055-02) according
to DIN 49073 in combination with an appropriate cover.
Overview of the functions:
− The device uses the leading edge phase control or trailing edge phase control principle
− The appropriate dimming principle for the load is set automatically or manually
− The set operating mode is indicated by an LED
− Switching on is performed using a soft start that is gentle on the lamp
− Switching on with the last set brightness or with the saved switch-on brightness
− Switch-on and minimum brightness can be saved permanently
− Electronic short-circuit protection with permanent switch-off after 7 seconds at the latest
− Electronic overtemperature protection
− Capacity expansion possible using power boosters.
− Device can be operated without neutral conductor
− Operating mode: HV LED
− 20 – 50 W electronic transformers with LV LED
− 3 – 50 W connected load for HV LED lamps
− 3 – 50 W HV LED lamps with leading edge phase control
− 3 – 100 W HV LED lamps with trailing edge phase control
− Load type: Mixed load
− 20 – 210 W ohmic-capacitive
− capacitive-inductive: not permitted
− 20 – 210 VA ohmic-inductive
− 3 – 50 W ohmic and HV LED
− 3 – 50 W ohmic and compact fluorescent lamp
− 230 V AC, 50/60 Hz
− Screw terminals
LB MANAGEMENT LIGHT 61