Jung LB management, Manual

Page: 109 / 196

WALKING TEST
Using the walking test function, you can check the detection range and the detection behaviour
and adjust if necessary using appropriate settings (detection area and sensitivities). The walking
test is performed independently of brightness.
SAVE SWITCH-ON BRIGHTNESS (MEMORY VALUE)
In combination with a dimming insert, you can save an individual switch-on brightness. Thus you
create your own standard. You can adjust the brightness as required using centre plates or con-
veniently using the Clever Config app on a smart phone.
SAVING AND RETRIEVING USER SETTINGS
The universal automatic switches provide the possibility to save the current configuration in the
device and in the Clever Config app.
Tip: Save the configuration after commissioning. If the end customer changes the settings later,
he always has the possibility to restore the settings of the installer.
The following settings can be saved:
− Operating function
− Operating mode
− Detection area settings (PIRs)
− Sensitivity settings (PIRs)
− Switch-on brightness (memory value)
− Brightness threshold
− Delay time
− Dynamic delay time
− Walking test
− Pulse operation
− Switch-off advance warning
− Presence simulation
− Hotel /pilot light function
− Night light function
− Constant light regulation
− Alarm operation function
4.4.5 Pairing universal automatic switches with mobile devices
The universal automatic switches can be paired with a smart phone via Bluetooth.
The commissioning and adjustment are child's play using the JUNG Clever Config app.
Proceed as follows to pair the universal automatic switch with a mobile telephone:
1. Activate the pairing mode on the device.
− Universal automatic switch 1.1 m: Switch the automatic switch to Continuous On and darken
the sensors for at least four seconds.
− Automatic switch 2.2 m and ceiling observer / presence detector: Press and hold the Bluetooth
button for at least four seconds.
2. Search for available devices using the app and follow the instructions on the display.
Up to eight smart phones can manage each Bluetooth device.
LB MANAGEMENT LIGHT 109