Jung LB management, Manual

Page: 63 / 196

Standard rotary dimmer LED
You switch and dim the LEDs using the Standard Rotary Dimmer
LED. The switching on is performed by soft start that is gentle
on the lamp, and the operation of the device is also possible
without a neutral conductor. The standard rotary dimmer is
mounted in device sockets according to DIN 49073 with an
appropriate cover.
Overview of the functions:
− The device uses the leading edge phase control or trailing edge phase control principle
− The appropriate dimming principle for the load is set automatically or manually
− Switching on with the last set brightness or with the saved switch-on brightness
− Switch-on and minimum brightness can be saved permanently
− Electronic short-circuit protection with permanent switch-off after 7 seconds at the latest
− Capacity expansion possible using power boosters.
− Load:
− 20 – 210 W ohmic-capacitive
− capacitive-inductive: not permitted
− 20 – 210 VA ohmic-inductive
− 3 – 60 W ohmic and HV LED
− 3 – 60 W ohmic and compact fluorescent lamp
− 3 – 60 W dimmable electronic transformers with 12 V LED
− 3 – 60 W HV LED lamps
− Device can be operated without neutral conductor
− 230 V AC, 50/60 Hz
− Screw terminals
LB MANAGEMENT LIGHT 63