Jung LB management, Manual

Page: 142 / 196

Relay switch insert 1-channel
The 1-channel relay switch insert switches different lamps, e.g.
LED, halogen bulbs or fluorescent lamps. Using the operating
mode selection button (BAWT) with LED indicator, you can
conveniently set delay times if desired. The switch insert can be
installed in a commercially available device socket (e.g. Kaiser
1055-02) according to DIN 49073.
Electric underfloor heating systems or electrothermal drives are
controlled in combination with room thermostat displays.
Overview of the functions:
− Connection of satellite units is possible
− Shut-off delays can be adjusted when using the Standard centre plate
− Satellite unit input for 2/3-wire satellite unit
− Suitable for switching the following loads per channel:
− 2,300 W AGL, 2,300 W HV halogen,
− 1,000 W LV halogen with conventional transformers
− 1,500 W LV halogen with Tronic transformers
− 1,200 W fluorescent lamps, uncompensated
− Type 500 W HV LED lamps
− The following functions can be set using the operating mode selector (BAWT):
− Test (On / Off using short press of the BAWT)
− None / 1 min / 5 min / 30 min / 60 min delay time (automatic Off after manual On)
− 230 V AC, 50/60 Hz
− Screw terminals
− 3,600 W room thermostat for electric floor thermostat
− 1 to 5 electrothermal drives
142 TEMPERATURE CONTROL