Jung LB management, Manual

Page: 175 / 196

OPERATION 175
YOU WOULD LIKE TO... IMPLEMENTATION FURTHER INFORMATION
... switch the light. − Briefly press the centre plate. If the dimming insert is used, the light is switched
to the saved switch-on brightness when switch-
ing on.
... switch on the light with mini-
mum brightness. − Press and hold the centre plate at the
bottom.
... dim the light brighter. − Press and hold the centre plate at the
top.
The light can be dimmed up to the maximum
brightness.
... dim the light darker. − Press and hold the centre plate at the
bottom.
The light can be dimmed down to the minimum
brightness.
... adjust the brightness / travel
position. − Press and hold the centre plate in the
middle.
... save the current brightness
as switch-on brightness. − Adjust the light to the desired brightness.
− Press and hold the centre plate at the top
and bottom simultaneously for longer
than four seconds.
The light switches off briefly and immediately on
again.
The switch-on brightness is saved. If a saved
brightness is saved again, the dimmer switches
on after every switch-on with the value it had
before the switching off.
... save a ventilation position
from the upper limit position. − Press and hold the centre plate at the bot-
tom.
− Press and hold the centre plate at the top
and bottom simultaneously for longer
than four seconds.
− Release the buttons when the desired
position is reached and press the button
at the top within four seconds.
Any previous position is overwritten by saving a
new position (see page 115).
... adjust the colour tempera-
ture for DALI control devices. − Press and release the centre plate at the
top and bottom simultaneously twice.
− the colour temperature can be adjusted
directly on the right rocker
The value is saved permanently after it has been
adjusted.
The brightness is adjusted with the left rocker