Jung LB management, Manual

Page: 73 / 196

Ceiling observer/presence detector
The ceiling observer / presence detector controls the lighting in
interior rooms depending on movement. If motion is detected
in the detection area, it switches on the lighting automatically
and off again after expiry of a specified delay time – conven-
ient and energy-saving. Thanks to its special lens design, the
ceiling observer / presence detector has a large detection area
that also includes the perpendicular downward area.
Installation heights of up to 6 metres enable the use in corri-
dors or stairwells.
You can make the settings conveniently using your smart
phone and the Clever Config app.
Overview of the functions:
− Automatic switching of lighting, depending on brightness and movement
− 360° Detection range for installation heights up to 6 metres
− Thee PIR sensors independent of each other that can be adjusted individually.
− Extension of the detection range by grouping up to five devices
− Stairwell function with switch-off advance warning
− Optimised break-in prevention using presence simulation
− Constant light regulation in combination with dimmer inserts
− Can be used as observer and as presence detector
− Alarm function
− Basic brightness can be adjusted
− Settings using smart phone and Clever Config app
− Installation height 3.0 metres
− Tangential movement direction detection area: Ø 20 metres
− Radial movement direction detection area: Ø 12 metres
LB MANAGEMENT LIGHT 73