JUKI SC-922, Instruction Manual

Page: 18 / 58

– 16 –
4
3
5
1 2
2
#
. For tHE oPErator
1. operating procedure of the sewing machine
1) Press ON button
1
of the power swtch to turn
ON the power.
(Caution) If the power indication LED does not
light up even when turning oN the power
switch, immediately turn oFF the power
switch and check the voltage.
In addition, in such a case as this, re-turn
oN the power switch when 2 to 3 min-
utes or more have passed after turning
oFF the power switch.
2) For some machne head nstalled, the needle bar automatcally rotates to ts upper poston f the needle
bar s not there.
(Caution) When the power to the sewing machine is turned ON for the first time after installation, it may
require a longer time to get ready for operation since it carries out initialization procedure. In
addition, be sure not to place hands or any other article under the needle since the needle bar
may move when the power is turned oN.
3) When depressing front part
3
of the pedal, the
sewng machne rotates at the number of revolu-
tons n accordance wth the depressng amount.
When the pedal is returned to the neutral posi -
ton, the sewng machne stops.
4) When lightly depressing back part
4
of the
pedal, the presser goes up. (PFL type only)
5) When strongly depressing back part
5
of the
pedal, thread trmmng s performed.
8) When sewing is completed, press OFF button
2
of
the power swtch to turn OFF the power swtch after
confirming that the sewing machine has stopped.
7) For some types of the sewng machne heads, re-
verse feed s performed by pressng touch-back
swtch
7
. (The figure given illustrates the case of
the LU-1510N-7.)
PFL KFL
Presser foot operaton
by pedal
Enabled Disabled
Pedal depressng depth
for thread trmmng
Deep Shallow
6) For some types of the sewng machne heads, t
s possble to program varous sewng patterns,
usng the operaton panel, such as the reverse
feed sttchng at sewng start and that at sewng
end. When you use CP-18
6
wth your sewng
machne, refer to "
#
-3. operating procedure of
the sewing pattern" p.18 for details. When you
use any other operaton panel wth your sewng
machne, refer to the Instructon Manual for the
respective operation panel. (The figure given il -
lustrates the case of the LU-1510N-7.)
7
6